CURT 13530 Class 3 Trailer Hitch, 2-Inch Receiver for Select Toyota Highlander and Lexus RX330, RX350 and RX400h

Curt Manufacturing 13530 - To ensure that curt class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with high-strength steel and precise welding. Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing.

Every curt class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays. Easy to install. Gross trailer weight, 000 lbs. Tongue weight, 4, 500 lbs. Plus, to give you the confidence to Bring It no matter what your next task is, all class 3 hitches are backed by a limited lifetime warranty.

CURT 13530 Class 3 Trailer Hitch, 2-Inch Receiver for Select Toyota Highlander and Lexus RX330, RX350 and RX400h - Curt class 3 trailer hitches are typically used to tow utility trailers, boat trailers, campers, snowmobile or ATV haulers and more NOTE: Never exceed the lowest-rated towing component. Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. Tw. Each custom class 3 hitch is made vehicle-specific.

This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, bike rack, cargo carrier, allowing for a wide variety of towing options.





CURT 56107 Vehicle-Side Custom 4-Pin Trailer Wiring Harness for Select Toyota Highlander

Curt Manufacturing 56107 - This vehicle-trailer wiring harness is designed for select models of the Toyota Highlander, ensuring the easiest possible installation and the most reliable wiring connection. Reliable power. Curt custom wiring connectors are designed to be long-lasting and simple to install. With a curt custom wiring connector, there is no need to tap into the taillight assembly because a special socket is already provided.

A curt custom wiring connector sometimes called a T-connector is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring. The 4-flat trailer wiring can be used to connect trailer taillights, brake lights and turn signals.

CURT 56107 Vehicle-Side Custom 4-Pin Trailer Wiring Harness for Select Toyota Highlander - This custom wiring connector provides a 4-way flat connector socket and comes with a circuit-protected converter. It easily fits onto the 4-way flat connector when not in use, protecting it against the outdoor elements and internal corrosion. This 4-way trailer wiring harness is built with surface mount technology.

It is designed to be a custom wiring option for certain years of the Toyota Highlander to verify your vehicle compatibility, see the CURT application guide at. No cutting! no splicing! this trailer wiring harness plugs into existing factory wiring on your vehicle and equips it with a standard 4-pin trailer wiring connector for plugging in and towing a trailer.

Standard connector. Though this option is not available on every vehicle, some automotive manufacturers design their vehicles to be easily equipped for towing by supplying a socket, integrated into the vehicle's electrical system, to readily accept a custom wiring connector.





CURT 45036 Trailer Hitch Ball Mount with 2-Inch Trailer Ball & Hitch Pin, Fits 2-Inch Receiver, 7,500 lbs. GTW, 2-Inch Drop

Curt Manufacturing 45036 - These finishes resist damage from rain, snow, road salt and other corrosive threats. Easy to install. The 4-flat trailer wiring can be used to connect trailer taillights, brake lights and turn signals. It easily fits onto the 4-way flat connector when not in use, protecting it against the outdoor elements and internal corrosion.

Dependable strength. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. This type of circuitry generates less heat, optimal light intensity and durable performance. Dust cover. This curt loaded ball mount features a gross trailer weight capacity of 7, 500 lbs. When it comes to ball mounts, a CURT loaded ball mount is the complete package.

All curt loaded ball mounts feature 2" x 2" shanks and are made with the same superior quality we put into each of our products. This ball mount also has a length of 8-1/4", a drop of 2" and comes with a gloss black powder coat finish to resist rust, chipping and UV damage. Rated to tow 7, 500 pounds gross trailer weight and 750 pounds tongue weight, this ball hitch offers dependability for your towing setup.

CURT 45036 Trailer Hitch Ball Mount with 2-Inch Trailer Ball & Hitch Pin, Fits 2-Inch Receiver, 7,500 lbs. GTW, 2-Inch Drop - This means a loaded ball mount is ready for towing right out of the package! Each one also comes with a pin and clip for mounting the ball mount into the appropriate size receiver tube. This vehicle-trailer wiring harness is designed for select models of the Toyota Highlander, ensuring the easiest possible installation and the most reliable wiring connection.

Reliable power.





CURT 22272 Rubber Trailer Hitch Cover Fits 2-Inch Receiver

Curt Manufacturing 22272 - It easily fits onto the 4-way flat connector when not in use, protecting it against the outdoor elements and internal corrosion. Dependable strength. Trailer hitch covers are the ideal way to protect your hitch receiver when not towing. These finishes resist damage from rain, snow, road salt and other corrosive threats.

Easy to install. Easy to install. No cutting! no splicing! this trailer wiring harness plugs into existing factory wiring on your vehicle and equips it with a standard 4-pin trailer wiring connector for plugging in and towing a trailer. Standard connector. Rated to tow 7, 500 pounds gross trailer weight and 750 pounds tongue weight, this ball hitch offers dependability for your towing setup.

CURT 22272 Rubber Trailer Hitch Cover Fits 2-Inch Receiver - Keep your trailer hitch's receiver tube clean and protected when not towing with one of CURT's attractive and durable tube covers. This trailer hitch cover is made from quality black rubber, in spite of frequent exposure to rain, meaning it will never rust or corrode, snow, mud and other elements. Easy to install.

If you own a vehicle with a trailer hitch, you know how quickly the receiver tube can get built up with dirt, debris and road grime. With enough time and moisture exposure, the inside of a receiver tube can become seized up with rust, making it very difficult to use. To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver.





Tekonsha 118413 T-One Connector Assembly with Converter

Tekonsha 118413 - T-one tow harness connectors require no splicing of vehicle wires, just locate your vehicle's wiring harness connector, unplug the connection and insert the T-One Connector into the vehicle's harness. There is no need for a hitch pin or clip. Long-lasting. The ball mount has a 2-inch drop, 2-inch diameter trailer hitch ball, 5/8-inch hitch pin hole and 8-1/4-inch overall length.

Ready to tow. The tekonsha line has long been trusted by professional towers and weekend warriors for worry-free travel. Intelligent trailer braking is the key to the success of the Tekonsha product line. Rated to tow 7, 500 pounds gross trailer weight and 750 pounds tongue weight, this ball hitch offers dependability for your towing setup.

Tekonsha 118413 T-One Connector Assembly with Converter - This type of circuitry generates less heat, optimal light intensity and durable performance. Dust cover. Trailer hitch covers are the ideal way to protect your hitch receiver when not towing. From it's humble origins as a manufacturer of RV stairs and steps in 1964, Tekonsha has evolved to become a trusted name in towing safety.

Backed by Tekonsha's 1 year limited warranty. No cutting! no splicing! this trailer wiring harness plugs into existing factory wiring on your vehicle and equips it with a standard 4-pin trailer wiring connector for plugging in and towing a trailer. Standard connector.





Tekonsha 118248 -Flat Tow Harness Wiring Package with Circuit Protected ModuLite Module

Tekonsha 118248 - This hitch cover is designed to fit a 2-inch x 2-inch receiver tube, perfect for most class 3, class 4 and class 5 hitches. Convenient. The ball mount has a 2-inch drop, 2-inch diameter trailer hitch ball, 5/8-inch hitch pin hole and 8-1/4-inch overall length. Ready to tow. It easily fits onto the 4-way flat connector when not in use, protecting it against the outdoor elements and internal corrosion.

Dependable strength. Circuit protected modulite module ensures electrical system compatibility between tow vehicle and trailer, and protects the tow vehicle from harmful electrical shorts or incorrect wire connections. To eliminate the need for tools or additional components, this trailer hitch cap installs with a friction fit.

Tekonsha 118248 -Flat Tow Harness Wiring Package with Circuit Protected ModuLite Module - Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. Trailer hitch covers are the ideal way to protect your hitch receiver when not towing. It is constructed from welded steel and has a hollow shank.

Versatile use. It protects the receiver against dirt, debris and rust, water, while adding a finished look to your vehicle. Standard fit.





CURT 55400 Vehicle-Side Custom 4-Pin Trailer Wiring Harness for Select Toyota Highlander, Hyundai Azera

Curt Manufacturing 55400 - Included 4-wire flat connector is compatible with 5, 6 and 7 pole adapters not included to fit just about any trailer system. Curt trailer hitch covers come in industry-standard sizes to fit virtually any trailer hitch receiver. Circuit protected modulite module ensures electrical system compatibility between tow vehicle and trailer, and protects the tow vehicle from harmful electrical shorts or incorrect wire connections.

Just fit it into the hitch receiver and push it into place. 4-way trailer wiring is popular on a wide variety of trailers, adding versatile towing options for your vehicle. Vehicle-specific. Custom wiring harnesses plug into your vehicle's electrical system using original equipment OEM connectors. This type of circuitry generates less heat, optimal light intensity and durable performance.

CURT 55400 Vehicle-Side Custom 4-Pin Trailer Wiring Harness for Select Toyota Highlander, Hyundai Azera - Dust cover. This hitch cover is designed to fit a 2-inch x 2-inch receiver tube, perfect for most class 3, class 4 and class 5 hitches. Convenient. This harness provides a 4-way flat connector socket and comes with a circuit-protected converter. This trailer hitch cover is made from quality black rubber, snow, meaning it will never rust or corrode, in spite of frequent exposure to rain, mud and other elements.

Easy to install.





Toyota 08942-48870-BB Towing Option 4 Flat Wire Harness

Toyota 08942-48870-BB - High performance. Vehicle specific replacement trailer wiring harness for vehicles originally equipped with a factory installed tow package - replaces damaged or missing factory harnesses. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. Easy to install. It easily fits onto the 4-way flat connector when not in use, protecting it against the outdoor elements and internal corrosion.

Dependable strength. The 4-flat trailer wiring can be used to connect trailer taillights, brake lights and turn signals. This type of circuitry generates less heat, optimal light intensity and durable performance. Dust cover. To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver.

Toyota 08942-48870-BB Towing Option 4 Flat Wire Harness - Trailer hitch covers are the ideal way to protect your hitch receiver when not towing. Rated to tow 7, 500 pounds gross trailer weight and 750 pounds tongue weight, this ball hitch offers dependability for your towing setup. Quick and easy plug-in installation - no cutting or splicing necessary; simply plug into the existing vehicle connector and you are ready to start towing.

To promote long-lasting use and weather resistance, this 4-pin trailer wiring harness comes with a rubber dust cover. The ball mount has a 2-inch drop, 2-inch diameter trailer hitch ball, 5/8-inch hitch pin hole and 8-1/4-inch overall length.





CURT 56146 Powered 3-to-2-Wire Splice-in Trailer Tail Light Converter with 4-Pin Wiring Harness

Curt Manufacturing 56146 - Included 4-wire flat connector is compatible with 5, 6 and 7 pole adapters not included to fit just about any trailer system. Reliable power. Vehicle specific replacement trailer wiring harness for vehicles originally equipped with a factory installed tow package - replaces damaged or missing factory harnesses.

To promote long-lasting use and weather resistance, this 4-pin trailer wiring harness comes with a rubber dust cover. It easily fits onto the 4-way flat connector when not in use, protecting it against the outdoor elements and internal corrosion. Dependable strength. This 4-way trailer wiring harness is built with surface mount technology.

CURT 56146 Powered 3-to-2-Wire Splice-in Trailer Tail Light Converter with 4-Pin Wiring Harness - Simple, easy to follow, do-it-yourself instructions included in every package; no special tools required for installation. The 4-flat trailer wiring can be used to connect trailer taillights, brake lights and turn signals. This vehicle-trailer wiring harness is designed for select models of the Toyota Highlander, ensuring the easiest possible installation and the most reliable wiring connection.

Reliable power. Circuit protected modulite module ensures electrical system compatibility between tow vehicle and trailer, and protects the tow vehicle from harmful electrical shorts or incorrect wire connections. The 4-flat trailer wiring can be used to connect trailer taillights, brake lights and turn signals.





Tekonsha 118478 T-One Connector Assembly with Upgraded Circuit Protected ModuLite Module

Tekonsha 118478 - This trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. 16 gauge bonded wire with 4-flat plug and cap; 2. 1 amp stop light/turn signal circuit capacity; 5. 6 amp taillight circuit capacity; upgraded circuit protected ModuLite HD module. To help protect this trailer light converter from the elements, it comes with a rubber dust cover for the 4-pin wiring connector, shielding it from rain, dirt, dust and more when not in use.

T-one tow harness connectors require no splicing of vehicle wires, just locate your vehicle's wiring harness connector, unplug the connection and insert the T-One Connector into the vehicle's harness. It comes with a pre-attached tow ball for ready coupling and a trailer hitch pin to securely mount onto your hitch receiver.

Tekonsha 118478 T-One Connector Assembly with Upgraded Circuit Protected ModuLite Module - Corrosion-resistant. Instructions are easy to follow and include detailed photos; backed by Tekonsha's 1 Year Limited Warranty. This vehicle-trailer wiring harness is designed for select models of the Toyota Highlander, ensuring the easiest possible installation and the most reliable wiring connection. Reliable power.

This hitch cover is designed for optimal convenience, allowing you to install it in a moment, whenever needed. This 4-way trailer wiring harness is built with surface mount technology.





Hopkins 43425 Plug-In Simple Vehicle Wiring Kit

Hopkins Towing Solution 43425 - No cutting! no splicing! this trailer wiring harness plugs into existing factory wiring on your vehicle and equips it with a standard 4-pin trailer wiring connector for plugging in and towing a trailer. Standard connector. 16 gauge bonded wire with 4-flat plug and cap; 2. 1 amp stop light/turn signal circuit capacity; 4.

2 amp taillight circuit capacity; lighting converter. This type of circuitry generates less heat, optimal light intensity and durable performance. Dust cover. 4-way trailer wiring is popular on a wide variety of trailers, adding versatile towing options for your vehicle. Vehicle-specific. Easy to install. There is no need for a hitch pin or clip.

Hopkins 43425 Plug-In Simple Vehicle Wiring Kit - Long-lasting. It is constructed from welded steel and has a hollow shank. Versatile use. 4-way trailer wiring is popular on a wide variety of trailers, adding versatile towing options for your vehicle. Vehicle-specific. Rated to tow 7, 500 pounds gross trailer weight and 750 pounds tongue weight, this ball hitch offers dependability for your towing setup.