JL Audio RD1000/1 NexD Monoblock Class D Car Audio Amplifier

#ad
JL Audio RD1000/1 #ad - Total power output: 2000 watts | CEA-2006 Compliant Amplifier. Jl audio rd1000/1 monoblock 1000 watts rms subwoofers speakers bass car amplifier new jl audio rd-series rd1000/1 | class-d monoblock amplifier | rms power rating: 4 ohms: 500 watts x 1 chan. Dual speaker terminals simplify the hookup of multiple speakers | heavy duty aluminum alloy heat-sink for extreme heat dissipation | Total Harmonic Distortion THD:.

2 ohms: 1000 watts x 1 chan. Differential-balanced inputs | speaker-level high-level inputs: jl audio xd-clraIC2-SW Required, sold separately | NexDTM Technology delivers outstanding sound quality, efficiency and reliability | LED clipping indicators | Pulse Width Modulated MOSFET power supply. Led power green and protect red indicators | soft start turn-on | Mono channel operation | Preamp RCA outputs to daisy chain multiple amps | 3-way protection circuitry thermal, overload, and speaker short protection.

#ad



JL Audio RBC1 Remote Bass Control

#ad
JL Audio RBC1 #ad - The jl audio rbc-1 wired remote bass controller is designed to remotely control the Bass EQ boost or Input Level feature of JL Audio amplifier equipped with a "Remote Bass" or "Remote Level" port. Overrides on-board boost control. When the rbc-1 is connected, the on-board "Boost" control of the amplifier is defeated and the RBC-1 becomes the only active boost controller.

Remote bass control works with Original Slash Series JL Audio Amplifiers and the New V2 Slash. Low-profile design for custom installations. Remotely controls Bass EQ of JL Audio amplifiers.

#ad



JL Audio RD400/4 NexD 4 Channel Class D Car Audio Amplifier

#ad
JL Audio RD400/4 #ad - Low-profile design for custom installations. Frequency response: 12 Hz - 22 Hz. 4 channel class d amplifier | cea-2006 compliant amplifier | differential-balanced inputs | nexd technology delivers outstanding sound quality, overload, efficiency and reliability | Preamp RCA outputs to daisy chain multiple amps | 3-way protection circuitry thermal, and speaker short protection | Dual speaker terminals simplify the hookup of multiple speakers | Heavy duty aluminum alloy heat-sink for extreme heat dissipation Remote bass control works with Original Slash Series JL Audio Amplifiers and the New V2 Slash.

Rms @ 12. 5 v: 60 watts x 4 @ 4 ohm | 90 watts x 4 @ 2 ohm | Bridged 180 watts x 2 @ 4 Ohm. Overrides on-board boost control. Dimensions: 2. 13 in / 54 mmb h x 9. 78 in / 248 mm W x 6. 96 in / 177 mm D. Power Handling:. Rms @ 14. 4 v: 75 watts x 4 @ 4 ohm | 100 watts x 4 @ 2 ohm | Bridged 200 watts x 2 @ 4 Ohm. Remotely controls Bass EQ of JL Audio amplifiers.

#ad



13TW5V2-4 - JL Audio 13.5" 4-Ohm 600W Shallow Mount Car Subwoofer

#ad
JL Audio JL-13TW5V2-4 #ad - Rms @ 12. 5 v: 60 watts x 4 @ 4 ohm | 90 watts x 4 @ 2 ohm | Bridged 180 watts x 2 @ 4 Ohm. Low-profile design for custom installations. Patented "floating Cone Attach Method" Technology. General features: jl audio 13TW5V2-4 13. 5" 1200w 4 ohm tw5 thin line car audio subwoofer power handling: peak: 1200 watts rms: 600 watts Recommended Power Range: 250-600 watts Impedance: 4 Ohm Mica-filled polypropylene cone Santoprene surround Unique design allows for small airspace requirements Requires only 0

8 cubic feet of airspace mounting depth: 2-5/8 inches Cast alloy basket Frequency response: 20-500 Hz Sensitivity: 85. 63 db recommended enclosure Type: Sealed Minimum Sealed Box Volume: 08 cubic feet maximum Sealed Box Volume: 08 cubic feet top-mount depth: 2-5/8" cutout diameter: 12-1/2" shallow mount Installation Weight: 25 LBS Remote bass control works with Original Slash Series JL Audio Amplifiers and the New V2 Slash.

13TW5V2-4 - JL Audio 13.5" 4-Ohm 600W Shallow Mount Car Subwoofer #ad - Remotely controls Bass EQ of JL Audio amplifiers. Rms @ 14. 4 v: 75 watts x 4 @ 4 ohm | 100 watts x 4 @ 2 ohm | Bridged 200 watts x 2 @ 4 Ohm. Frequency response: 12 Hz - 22 Hz. Extremely shallow Mounting Depth 2. 5 inches.

#ad



JL Audio HD-RLC Amplifier Remote Level Control and Cable

#ad
JL Audio HD-RLC #ad - Patented "floating Cone Attach Method" Technology. The hd-rlc adjusts your amplifier's level, not its "bass boost, " so you maintain the same bass quality as you turn the volume up and down. Extremely shallow Mounting Depth 2. 5 inches. Remote bass control works with Original Slash Series JL Audio Amplifiers and the New V2 Slash.

Dma-optimized Motor Designs. The hd-rlc remotely controls the bass level of the following jl audio amplifiers:hd-series: all modelsXD-Series: All modelsMHD-Series: All modelsM-Series: M600/1, M400/4, M700/5, M200/2, M500/3, M600/6. When the hd-rlc is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle.

JL Audio HD-RLC Amplifier Remote Level Control and Cable #ad - The hd-rlc kit includes the rotary control with a black ABS knob, mounting hardware and one 18 ft. Power Handling:. Patented "concentric Tube" Suspension Design. Frequency response: 12 Hz - 22 Hz. Overrides on-board boost control. Rms @ 12. 5 v: 60 watts x 4 @ 4 ohm | 90 watts x 4 @ 2 ohm | Bridged 180 watts x 2 @ 4 Ohm.

#ad



AudioControl The EPICENTER Black Bass Restoration Processor

#ad
AudioControl EPICENTERBLACK #ad - Low-profile design for custom installations. Rms @ 12. 5 v: 60 watts x 4 @ 4 ohm | 90 watts x 4 @ 2 ohm | Bridged 180 watts x 2 @ 4 Ohm. Rms @ 14. 4 v: 75 watts x 4 @ 4 ohm | 100 watts x 4 @ 2 ohm | Bridged 200 watts x 2 @ 4 Ohm. Patented "floating Cone Attach Method" Technology. Frequency response: 12 Hz - 22 Hz.

The hd-rlc remotely controls the bass level of the following jl audio amplifiers:hd-series: all modelsXD-Series: All modelsMHD-Series: All modelsM-Series: M600/1, M400/4, M700/5, M500/3, M200/2, M600/6. When the hd-rlc is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle.

AudioControl The EPICENTER Black Bass Restoration Processor #ad - The hd-rlc kit includes the rotary control with a black ABS knob, mounting hardware and one 18 ft. Overrides on-board boost control. 5. 5 m cable. Sierra white Digital Bass Reconstruction Processor. Power Handling:. Extremely shallow Mounting Depth 2. 5 inches. Perfect addition to all systems.

#ad



JL Audio CP212-W0V3 Dual 12" 12W0v3 Ported Subwoofer Enclosure Box

#ad
JL Audio CP212-W0V3 #ad - Designed for forward, read or down-firing installation. The hd-rlc remotely controls the bass level of the following jl audio amplifiers:hd-series: all modelsXD-Series: All modelsMHD-Series: All modelsM-Series: M600/1, M200/2, M500/3, M700/5, M400/4, M600/6. When the hd-rlc is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle.

The hd-rlc kit includes the rotary control with a black ABS knob, mounting hardware and one 18 ft. Rms @ 14. 4 v: 75 watts x 4 @ 4 ohm | 100 watts x 4 @ 2 ohm | Bridged 200 watts x 2 @ 4 Ohm. 5. 5 m cable. Sierra white Digital Bass Reconstruction Processor. Power Handling:. Remotely controls Bass EQ of JL Audio amplifiers.

JL Audio CP212-W0V3 Dual 12" 12W0v3 Ported Subwoofer Enclosure Box #ad - Rms @ 12. 5 v: 60 watts x 4 @ 4 ohm | 90 watts x 4 @ 2 ohm | Bridged 180 watts x 2 @ 4 Ohm. Power handling: peak: 600 watts | RMS: 300 watts. Overrides on-board boost control. Perfect addition to all systems.

#ad



JL Audio 10W3v3-4 10" Single 4 ohm W3v3 Series Subwoofer 10W3v3

#ad
JL Audio 10W3V3 #ad - Patented "concentric Tube" Suspension Design. Dimensions: 2. 13 in / 54 mmb h x 9. 78 in / 248 mm W x 6. 96 in / 177 mm D. Extremely small Sealed Enclosure Volume Requirements. Low-profile design for custom installations. Mineral-filled polypropylene cone woofer. 5. 5 m cable. Sierra white Digital Bass Reconstruction Processor.

Cp212-w0v3 - jl audio 12" 12w0v3-4 loaded Ported Enclosure with Gray Carpet Finish. Cutout diameter: 9. 0625". Dma-optimized Motor Designs. Perfect addition to all systems. Jl audio 10w3v3-4: 10-inch 250 mm subwoofer driver, 4 Ω remote bass control works with Original Slash Series JL Audio Amplifiers and the New V2 Slash.

JL Audio 10W3v3-4 10" Single 4 ohm W3v3 Series Subwoofer 10W3v3 #ad - Rms @ 12. 5 v: 60 watts x 4 @ 4 ohm | 90 watts x 4 @ 2 ohm | Bridged 180 watts x 2 @ 4 Ohm. Large roll surround for generous amounts of excursion. Remotely controls Bass EQ of JL Audio amplifiers. Overrides on-board boost control. Patented Bass Maximizer.

#ad