As an Amazon Associate I earn from qualifying purchases.
QuadraFire #ad - Exclusive 1 year warranty from Date of Purchase. 115v ac, 60hz,. 27 /. 84 amps, thermally Protected. Quadra fire distribution/Convection Blower Premium Replacement.
Breckwell #ad - X 1 13/16” length Shaft. Note: please check your current fan paddle size. Clockwise rotation, 120v AC, 60Hz, .95 amps. Includes 6″ gasket, adapter Plate, and 4 3/4″ Fan Paddle.
gohantee #ad - The design of fan blades is also designed according to the effect, it will cause cold wind. More stable and environmental protection. Reduce wood consumption from your stove and provide greater comfort. Low noise in operation the fan will work at less than 25db, heat around room and increase temperature with low noise.
It widely used for wood burning stove, pellet stove and more. The temperature of the fireplace affects the speed of the fan. Advantage no batteries or electricity required. The stove fan driven by the heat generated by the fireplace or wood burning stove and conducts to the fan base to drive the blades.
Recommended surface temperature is between 392°f - 644°f200-340°c don't over 350°c662°F, avoid damage to the components due to overheating. The purpose of this fan is to spread hot air to entire house, but the effect is not so good when the blade is large. A thermometer included to monitor the temperature of your stove. Overheating protection, wear-resisting, the in-built bi-metallic strip at the base of the stove fan is designed to raise the edge of the fan slightly as the maximum operating temperature is approached to protect the motor and the moelectric module.
Whitfield #ad - Rpm: 3000 ; voltage: 115 vAC 60 Hz. Free tech support. Warranty: 1 Year. Whitfield pellet stove room air convection Blower Fan - 12146109, 12126109. Use amazon messager to contact Jason. Use amazon messager to contact Seller. Free tech support.
Pelpro #ad - Extremely Durable. Includes Gasket. For units made after August of 2013 ONLY. Fits pp130 & other Models. Easy Installation.
Pellethead #ad - Replaces part # 250-00527 | 90-0391 | 93005535 | 250-00538 **if you have a 6" motor** 7" motors will require an adapter plate. Top quality lopi & avalon Direct Replacement Shaded Pole Motor.
Exclusive 1 year manufacturer warranty with our no hassle replacement guarantee. Fits avalon pellet stoves: ~ 900 pi ~ 900 ps ~ arbor ~ astoria bay pi ~ astoria bay ps ~ avanti pi ~ avanti ps ~ newport bay pi ~ newport ps fits lopi pellet stoves: ~ fox fire 400 PS ~ Fox Fire 400 PI ~ Fox Fire PS ~ Elan ~ Heritage Bay PS ~ Heritage Bay PI ~ Leyden ~ Pioneer Bay PI ~ Pioneer PS ~ Yankee Bay PI ~ Yankee PS.
1. QuadraFire
#adWood & Gas 812-4900, Quadrafire Stove Fan Room Air Blower Fan Pellet
#adMore information #ad
Fits several quadra-fire & heatilator Pellet, Gas and wood stove models. Please verify your model and contact us if you require assistance.| Brand | QuadraFire #ad |
| Manufacturer | Quadra Fire #ad |
| Weight | 5 Pounds |
| Part Number | 812-4900 (Replaces 812-4540) |
| Model | 812-4900 |
More information #ad
2. Breckwell
#adBreckwell Pellet Stove Combustion Exhaust Blower Fan Motor. A-E-027, PP7610
#adMore information #ad
Breckwell pellet stove combustion exhaust fan kit - A-E-027. 5/16” dia. We have listings for both the 5" and 4 3/4" Fan Paddle.| Brand | Breckwell #ad |
| Manufacturer | ESES Stove #ad |
| Part Number | A-E-027 / PH-UNIVCOMBKIT-P |
More information #ad
3. gohantee
#adFireplace Stove Fan 5-Blades, Silent Motors Heat Powered Stove Fan Circulates Warm / Heated Air Eco Stove Fan with Thermometer, for Gas/Pellet/Wood/Log Stoves
#adIt widely used for wood burning stove, pellet stove and more. The temperature of the fireplace affects the speed of the fan. Advantage no batteries or electricity required. The stove fan driven by the heat generated by the fireplace or wood burning stove and conducts to the fan base to drive the blades.
More information #ad
If the wind is strong, so the wind cannot be too strong. Function the 5 blades stove fan speed up air circulation and improve the efficiency of fireplace fans, gas stove, to heat your room quickly. Operating temperature the working temperature of the fan is 122°f - 662°f 50°c - 350°c. Recommended surface temperature is between 392°f - 644°f200-340°c don't over 350°c662°F, avoid damage to the components due to overheating. The purpose of this fan is to spread hot air to entire house, but the effect is not so good when the blade is large. A thermometer included to monitor the temperature of your stove. Overheating protection, wear-resisting, the in-built bi-metallic strip at the base of the stove fan is designed to raise the edge of the fan slightly as the maximum operating temperature is approached to protect the motor and the moelectric module.
| Brand | gohantee #ad |
| Manufacturer | gohantee #ad |
| Weight | 1.68 Pounds |
| Part Number | stove fan |
More information #ad
4. PelletStovePro
#ad812-4540, 812-4900, PelletStovePro, Quadrafire Santa Fe FS & Insert Pellet Stove Distribution Convection Blower Fan
#adPelletStovePro #ad - Free tech support. Quadrafire santa fe fs & insert pellet stove distribution Convection Blower Fan - 812-4540, 812-4900 Use amazon messager to contact seller. Voltage: 115 vac 60 Hz. Warranty: 1 Year.More information #ad
| Brand | PelletStovePro #ad |
| Manufacturer | Quadrafire #ad |
| Weight | 6 Pounds |
| Part Number | 812-4540, 812-4900 |
More information #ad
5. Whitfield
#ad12126109, PelletStovePro, Whitfield Pellet Stove Room Air Convection Blower Fan, 11-1220 G 12146109
#adMore information #ad
| Brand | Whitfield #ad |
| Manufacturer | Whitfield #ad |
More information #ad
6. PelletStovePro
#adPelletStovePro, King Ashley 5500XLT & 5500M Pellet Stove Distribution Convection Blower Fan 80472A
#adPelletStovePro #ad - Compatible with 80472. Voltage: 115 vac 60 Hz. King ashley 5500xlt & 5500m pellet stove Distribution Convection Blower Fan 80472A. Warranty: 1 Year.More information #ad
| Brand | PelletStovePro #ad |
| Manufacturer | US King Ashley #ad |
| Weight | 6 Pounds |
| Part Number | YYOJ |
More information #ad
7. Pelpro
#adKS-5020-1052, Pellet Stove Convection Blower for PP130 Units from 2013 to Present
#adMore information #ad
| Brand | Pelpro #ad |
| Manufacturer | PelPro #ad |
| Weight | 7 Pounds |
| Part Number | YYOJ |
More information #ad
8. Poagavgs
#adPro-Parts Pellet Stove 7" Combustion Exhaust Fan Mounting Gasket for Exhaust or Combustion Blower Fits Most Pellet Stove
#adPoagavgs #ad - Replacement for:most stove models, the round gasket that goes between the combustion exhaust motor and the motor housing. Measurements:gasket measures 7"across hole to hole - Approx 1/8" thickness.More information #ad
Croix, englander, whitfield, Heatilator, Lopi, Quadra-Fire and dozens more. This is a standard 7'' round pellet stove blower gasket that fits many makes and models. 1 pcs in package, Double check your gasket diameter prior to ordering. Compatible with:breckwell, avalon, danson, St.| Brand | Poagavgs #ad |
| Manufacturer | Poagavgs #ad |
More information #ad
9. Pellethead
#adTravis Industries Lopi & Avalon Exhaust Combustion Blower Motor Fan 250-00527 90-0391
#adExclusive 1 year manufacturer warranty with our no hassle replacement guarantee. Fits avalon pellet stoves: ~ 900 pi ~ 900 ps ~ arbor ~ astoria bay pi ~ astoria bay ps ~ avanti pi ~ avanti ps ~ newport bay pi ~ newport ps fits lopi pellet stoves: ~ fox fire 400 PS ~ Fox Fire 400 PI ~ Fox Fire PS ~ Elan ~ Heritage Bay PS ~ Heritage Bay PI ~ Leyden ~ Pioneer Bay PI ~ Pioneer PS ~ Yankee Bay PI ~ Yankee PS.
More information #ad
3000 rpm, clockwise rotation 120V AC, 60Hz.| Brand | Pellethead #ad |
| Manufacturer | Pellethead #ad |
| Part Number | Avalon PH-3000FM |
More information #ad
10. Pro-Parts
#adPro-Parts 3Pk Pellet Stove 6" Combustion Exhaust Fan Mounting Gasket for Exhaust or Combustion Blower Fits 100's and Most Pellet Stoves 2100J MAR60487
#adPro-Parts #ad - Croix, quadra-Fire and dozens more. Replacement for:100's of stove models, the round gasket that goes between the combustion exhaust motor and the motor housing. This is a standard 6'' round pellet stove blower gasket that fits many makes and models.More information #ad
Compatible with:breckwell, Englander, Lopi, avalon, Whitfield, Heatilator, danson, St. Measurements:gasket measures 6" diameter, 5. 5" across hole to hole - Approx 1/8" thickness. 3 pcs in package, Double check your gasket diameter prior to ordering.| Brand | Pro-Parts #ad |
| Manufacturer | Pro-Parts #ad |
More information #ad
