As an Amazon Associate I earn from qualifying purchases.





No nail and glue needed. This roll out drawer for Cabinet Includes two 20 Inch full extension drawer slides side-mounted.
The minimum cabinet opening width should be 24 inch, and the interior depth of cabinet should be 21. 25 inch - 23 inch include a adjustable bracket to drill on the cabinet. Not assembled: shipped "unassembled" but should be very easy to assembleand take just a few minutes. Drawer sliders both sides total width is 1 inch.



25-inch high minimum opening for installation.
Convenient workspace: adds 31. 75 inches of counter space and holds up to 100 pounds when fully extended, simply add your own drawer front not included; Uses mechanical slide advancement that features stop locks to extend and retract; Not recommended or intended to be used as a cutting board.

1. PRIME-LINE
#ad
Off-White 1-Pair, Prime-Line R 7265 Drawer Track Back Plate, 3/8 inch x 1 inch, Plastic
#adPRIME-LINE #ad - Deep openings. Used to support side mounted drawer glides. Tall x 3-9/16 in. X 1 in. Contains 1 pair of drawer track back plates 1 left and 1 right. 3/8 in. Fits drawer track systems that are 3/8 in. Mounting hardware included. White plastic construction. Wide x 1 in.More information #ad
Brand | PRIME-LINE #ad |
Manufacturer | Prime-Line Products #ad |
Height | 9.35 Inches |
Length | 1.6 Inches |
Weight | 0.15 Pounds |
Width | 3.75 Inches |
Part Number | R 7265 |
Model | R 7265 |
Warranty | 1 year limited |
More information #ad
2. Liberty Hardware
#ad
Liberty D688SEC-W-TX Face-Frame Socket Set for Bottom Mount Drawer Slides, White
#adLiberty Hardware #ad - The slide system includes left and right slides, along with the mounting hardware. White finish. Mounts to the back of the cabinet. Use to install European drawer slides to face frame cabinets. 100-pound load capacity.More information #ad
Brand | Liberty Hardware #ad |
Manufacturer | Liberty Hardware #ad |
Height | 1.2 Inches |
Length | 2.52 Inches |
Width | 2.95 Inches |
Part Number | D688SEC-W-TX |
Model | D688SEC-W-TX |
More information #ad
3. Liberty Hardware
#ad
LIBERTY 942005 Soft-Close Ball Bearing Drawer Slide, 1 Pair 2 Pieces, 20 inch
#adLiberty Hardware #ad - Detailed instructions and mounting hardware included for easy installation additional brackets needed for face frame drawer construction. Featuring soft close functionality to close any drawer softly and silently.More information #ad
Zinc plated, steel construction ball bearing slides are rated for medium duty use loads up to 50 pounds. These slides are compatible with most major drawer and cabinet types and are ideal for new construction, remodeling and replacement projects.Brand | Liberty Hardware #ad |
Manufacturer | LIBERTY #ad |
Height | 1.75 Inches |
Length | 20 Inches |
Weight | 6.5 Pounds |
Width | 0.5 Inches |
Part Number | 942005 |
Model | 942005 |
More information #ad
4. Liberty Hardware
#ad
Liberty D68824C-W-TX 24-Inch Bottom Mount Drawer Slide
#adLiberty Hardware #ad - Includes mounting hardware and installation instructions. Made from stamped steel with a white epoxy finish. 3/4 extension opening allows for the majority of the drawer to be accessed.More information #ad
Rated for normal-duty use loads up to 50 lbs. Self-closing functionality ensures that drawers stay firmly closed.Brand | Liberty Hardware #ad |
Manufacturer | LIBERTY #ad |
Height | 1 Inches |
Length | 1 Inches |
Weight | 1.5 Pounds |
Width | 23.8 Inches |
Part Number | D68824C-W-TX |
Model | D68824C-W-TX |
More information #ad
5. Laurey
#ad
Pack of 1, Laurey 98201 Perfect Mount Precision Allignment Template for Cabinet Hardware, Drawer Slides
#adLaurey #ad - Product is manufactured in United States. Brand name: Laurey. Model number: 98201. Country of Origin: China.More information #ad
Brand | Laurey #ad |
Manufacturer | Laurey #ad |
Height | 10 Inches |
Length | 11.5 Inches |
Weight | 0.08 Pounds |
Width | 6 Inches |
Part Number | 98201 |
Model | 98201 |
Warranty | Yes - With proof of purchase |
More information #ad
6. COUVER
#ad
CabinetRTA DIY Slide Out Cabinet Shelf Pull-Out Wood Drawer Storage W24 x D21, Non Soft-Close Slide
#adCOUVER #ad - No paint or stain is applied. 2021. This pullout drawer Box actual width is 23 inch. Natural wood finished: this pull Out Drawer Organizer is dovetail joint drawer box. This pull out drawer has two 5/8" thick solid woods, and one thick plywood bottom.No nail and glue needed. This roll out drawer for Cabinet Includes two 20 Inch full extension drawer slides side-mounted.
More information #ad
Each order is One Single set. Assembly Instruction Updated Feb. This cabinet drawer is good for pantry, vanities, under sink kitchen or bathroom see video. 35mm slidernon soft-close slide: rated to hold up to 100 lb. The minimum cabinet opening width should be 24 inch, and the interior depth of cabinet should be 21. 25 inch - 23 inch include a adjustable bracket to drill on the cabinet. Not assembled: shipped "unassembled" but should be very easy to assembleand take just a few minutes. Drawer sliders both sides total width is 1 inch.
Brand | COUVER #ad |
Manufacturer | CabinetRTA #ad |
Height | 3 Inches |
Length | 21 Inches |
Weight | 10 Pounds |
Width | 23 Inches |
Part Number | CABINETRTA-DRAWER-B27 |
Model | CABINETRTA-DRAWER-B27 |
More information #ad
7. PRIME-LINE
#ad
Prime-Line R 7228 Drawer Slide Roller, Convex, Plastic Wheel, 1-1/8 inch Outside Diameter, Ball Bearing 2-pack,White
#adPRIME-LINE #ad - 1-1/8 in. Used to replace worn or missing rollers on metal drawer slide systems; frequently used on file cabinet drawer tracks. Hex nut included. Ball bearing feature allows for smoother operation. 20 corse thread. Diameter roller.More information #ad
Plastic tire with steel ball bearings and fittings. 9/32 in. Reach, with 1/4 in. Typically found on drawers and cupboard shelving units. Offset hub with a 1/4-20 x 3/8 in. White nylon roller with ball bearings. Features a 1/4 in. Threaded mounting stud. White in color. Outside diameter x 7/8 in. Wide x 1-1/8 in.Brand | PRIME-LINE #ad |
Manufacturer | Prime-Line Products #ad |
Height | 1.13 Inches |
Length | 0.88 Inches |
Weight | 0.1 Pounds |
Width | 1.13 Inches |
Part Number | R 7228 |
Model | R 7228 |
Warranty | Goods are warranted against manufacturing defects for 1 year. In no case is Prime-Line responsible for user related damage or damage incurred during installation. Warranty is void if products are subjected to abnormal conditions, misapplication or abuse. |
More information #ad
8. Knape & Vogt
#ad
Kv Economical Full Extension Drawer Slide 28" 100Lb Load Rating
#adKnape & Vogt #ad - Size: 27 3/4", side clearance: - 1/2" + 1/32" - 0 each side, Side height - 1-3/4". Looking for a different size? Search: Full Extension Waterloo Drawer Slides 100lb Load Rating Set.More information #ad
Front face frame mounting holes, 13mm slide thickness, 32mm Compatible, Screws Included. Hold in detent, lifetime warranty, Exceeds BIFMA standards, Bright Zinc Finish. Steel ball bearing movement, Lever link disconnect, Cushion outstop for noise reduction.Brand | Knape & Vogt #ad |
Manufacturer | Knape & Vogt #ad |
Part Number | TT100B28 |
More information #ad
9. Rev-A-Shelf
#ad
Natural Maple, Rev-A-Shelf 4TT-2133-1 31.75 Inch Wood Pull Out Tambour Table Kitchen Counter Extension with Slide for 24 Inch Drawers
#adRev-A-Shelf #ad - Included: includes tambour table, slide, and mounting hardware; Fully assembled maple wood construction with a clear coat finish for durability. Dimensions w x d x h: 22"w x 19. 94"d x 4. 75"h; face frame minimum cabinet opening 205 inches; frameless minimum cabinet opening: 22 inches; Designed to fully replace a 24-inch drawer; requires a 205-inch-wide by 4.25-inch high minimum opening for installation.
More information #ad
More counter space: create more counter space by replacing a kitchen drawer with this wooden tambour table pullout. Easy installation: mounts to drawer rails and rear wall; Adjustable door mount brackets are included and required for operation. Convenient workspace: adds 31. 75 inches of counter space and holds up to 100 pounds when fully extended, simply add your own drawer front not included; Uses mechanical slide advancement that features stop locks to extend and retract; Not recommended or intended to be used as a cutting board.
Brand | Rev-A-Shelf #ad |
Manufacturer | Rev-A-Shelf #ad |
Height | 22 Inches |
Length | 19.31 Inches |
Weight | 28.25 Pounds |
Width | 22 Inches |
Part Number | 4TT-2133-1 |
Model | 4TT-2133-1 |
Warranty | Limited Lifetime |
More information #ad
10. Rok
#ad
16", 14", 20", 100 lb Weight Capacity, Available in 12", 18", Pair of 24" Rok Hardware Soft Close Drawer Slides, Full Extension, Ball Bearing, 22" and 24" Lengths
#adRok #ad - 24" slide actual slide length = 23-11/16" 602mm ; Height: 1-13/16" 45. 7mm. Extremely light with a 2" soft close stroke. Requires a 1/2" side spacing per side Overall 1"; Includes: 2 Slides and Mounting Screws.More information #ad
No more slamming drawers with these full extension soft close drawer slides! Soft-close device dampens and absorbs force, causing it to close slowly and quietly. Pull force of 5. 5 to 6. 5 lbs.Brand | Rok #ad |
Manufacturer | Rok #ad |
Weight | 4 Pounds |
Part Number | ROKSCS24-100 |
Model | ROKSCS24-100 |
More information #ad