Top 9 CO2 Tank for Kegerator – Beer Brewing Kegs & Kegging

As an Amazon Associate I earn from qualifying purchases.

1. KegWorks

#ad

5 lb Aluminum CO2 Air Tank

#adKegWorks #ad - Has a capacity of 6 - 8 half kegs. 5 lb aluminum CO2 air tank for dispensing draft beer. Made of high quality aluminum alloy, making it lighter than steel. Brand new, not reconditioned. Tanks are shipped empty.

Brand	KegWorks #ad
Manufacturer	KegWorks #ad
Height	3 Inches
Length	18 Inches
Weight	8 Pounds
Width	4 Inches
Part Number	co25
Model	co25

2. Kegco

#ad

Kegco B5-RED 5 lb. Aluminum Co2 Tank with Red Finish for Kegerator and Draft Beer Dispensing

#adKegco #ad - Stamped with required U. All tanks ship empty. Produced from high-strength corrosion resistant aluminum alloy 6061-t6. 320 valves are cga approved and have a male thread for Co2 regulators. Department of transportation and transport Canada markings. Features service pressure up to 1800 psi/124 bar with a test pressure of 3000 psi/207 bar. S. Eye-catching tanks have a glossy red coating that acts as an extra layer of protection against corrosion and wear.

Brand	Kegco #ad
Manufacturer	Beverage Factory #ad
Part Number	B5-RED
Model	B5-RED

3. Beverage Elements

#ad

20 lb CO2 Tank New Aluminum CGA320 with SIPHON TUBE

#adBeverage Elements #ad - 1800 psi, dot-3al and tc-3alm designed, high strength aluminum alloy 6061-T6. Aluminum carbon dioxide Cylinder with CGA 320 valve installed and carry handle/valve protector. 20 pound lb capacity, Shipped empty. 8. 0 inch diameter, 28. 2 inch length, 1. 125" unf inlet thread.

Brand	Beverage Elements #ad
Height	25 Inches
Length	8 Inches
Weight	20 Pounds
Width	8 Inches
Part Number	CYL-20-AL-CO2-N-Sph
Model	CYL-20-AL-CO2-N-Sph

4. Kegco

#ad

5 lb, Kegco DDK Direct Draw Keg Tap Kit

#adKegco #ad - Monitor output pressure and tank capacity using the commercial grade Kegco 762 double gauge CO2 regulator. Once filled, the brand new 5 lb. Specially designed by Kegco to include everything you'll need to pressurize and tap a D system keg. Includes 5 feet of blue air line, two plastic snap clamps, and a neoprene washer to ensure leak-free connection. Aluminum co2 tank can dispense 4-5 full size kegs. Commercial grade kegco kt85D-L keg coupler allows you to tap all North American store bought kegs.

Brand	Kegco #ad
Manufacturer	Kegco #ad
Height	10 Inches
Length	18 Inches
Weight	13 Pounds
Width	10 Inches
Part Number	DDK
Model	BF DDK

5. Beverage Elements

#ad

10lb co2 Tank New Aluminum Cylinder with CGA320 Valve

#adBeverage Elements #ad - Includes new CGA320 valve. 1800 psi service pressure. Ships empty. Corrosion-resistant aluminum. At present we do not ship to california.

Brand	Beverage Elements #ad
Height	18.5 Inches
Part Number	CYL-10-AL-CO2-N
Model	CYL-10-AL-CO2-N

6. Kegco

#ad

Deluxe, Kegco BF EBDCK-5T Conversion Kit, 1 Faucet with Tank

#adKegco #ad - Includes empty 5 lb. A pressure release valve is conveniently located on the body. The gauge on top of the regulator indicates CO2 pressure in the keg, while the gauge on the side indicates the remaining volume of CO2 gas. Hassle-free from start to finish, and when you're done dispensing for the day, so it will need to be emptied manually. Door mount stainless steel drip tray: our 6" x 4" door mount drip tray's clean design, this drip tray can be quickly and easily mounted using the two screw holes in the backsplash, durable stainless steel construction, a removable grill makes clean-up a breeze.

This durable metal wrench has a vinyl coated red or blue handle that provides an easy grip while loosening or tightening shank collars, allowing you to quickly attach or remove your faucets without scratching them. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg. Lever handle keg coupler: this nsf-approved kegco kt85d-l "d" system keg coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs.

Aluminum co2 tank: all of our brand new tanks are made from high strength aluminum alloy which is not as heavy as a steel tank and will not rust! These eye-catching tanks have a glossy red coating that acts as an extra layer of protection against corrosion and wear. This drip tray does not have a drain, and attractive brushed finish have made it a favorite of beer lovers. Dual gauge regulator: durably constructed to deliver a consistent flow pour after pour, this kegco 762 Commercial Grade Double Gauge Regulator features a T-style adjustment valve that makes it easy to adjust the pressure inside of the keg.

Brand	Kegco #ad
Manufacturer	Kegco #ad
Height	10 Inches
Length	18 Inches
Weight	16 Pounds
Width	10 Inches
Part Number	DCK-5T
Model	BF EBDCK-5T
Warranty	1 Year

7. Cyl-Tec

#ad

Cyl-Tec CO2 Aluminum Cylinder with CGA 320 Valve, 5 lb

#adCyl-Tec #ad - It will melt if the tank is exposed to extreme heat i. E. Dot/tc certified - 1800 psi service pressure. Aluminum tanks are corrosion-resistant and will not rust as steel tanks do over time.

Made from high quality 6061-T6 brushed aluminum to ensure durability. Once filled it can dispense 5-7 beer kegs. Certified for use in the U. S. Dot and Canada T. C. 320 valves are approved by the compressed gas association CGA and have a male thread for CO2 regulators. The tank is stamped with these markings. A fire and therefore show that that the tank is no longer safe to use. 5 lb co2 tank is great for kegs or home brewing! Shipped empty - ships ready to fill empty. Federal law requires that this tank ship without being filled. The black hand wheel is made of plastic as a safety feature. New valve - includes new brass cga 320 co2 valve. High quality - sleek aluminum body.

Brand	Cyl-Tec #ad
Manufacturer	Cyl-Tec #ad
Height	14.2 Inches
Length	5.3 Inches
Weight	7.5 Pounds
Width	5.3 Inches
Part Number	Cyl-Tec
Model	CO2 Tank (5 lb)

8. Beverage Elements

#ad

5 lb. Aluminum CO2 Cylinder with CGA 320 Valve

#adBeverage Elements #ad - New cga320 valve. 1800 psi service pressure. Brushed aluminum external surface provides a low-maintenance finish.

Brand	Beverage Elements #ad
Manufacturer	Home Brew Stuff #ad
Height	17.9 Inches
Weight	7.91 Pounds
Part Number	5605
Model	CYL-5-AL-CO2-N

9. Luxfer

#ad

Zebra DNA Luxfer L6X Aluminum CO2 Tanks with CGA320 on/off Valve 5 LB, Brushed

#adLuxfer #ad - Minimum burst pressure tested to 2. 5 times service pressure without failure. Brushed external surface provides a low-maintenance finish. Thick, consistent walls resist damage. Highly corrosion-resistant interior and exterior. Lightweight––up to 40 percent lighter than comparable steel cylinders.

Brand	Luxfer #ad
Manufacturer	Luxfer #ad
Height	14.2 Inches
Length	5.3 Inches
Weight	6.2 Pounds
Width	5.3 Inches
Part Number	CO2-5LB-LUX
Model	CO2-5LB-LUX